The influence of methodology on the comparison of cytotoxicity of total-etch and self-etch adhesive systems.

OBJECTIVES: The present study aimed to compare the in vitro cytocompatibility of two etch-and-rinse (Adper Scothbond, Optibond) and two self-etch (Clearfill SE Bond and Single Bond Universal) dental adhesives through a dentin-barrier model with human pulp fibroblasts. METHODS: Human fibroblasts were placed on a plastic device containing 500µm human dentin discs treated with each adhesive or without treatment (control). Other groups were directly exposed to media conditioned with adhesive samples according to ISO 10993-5:2009. After 24h exposure, cell viability was assessed by XTT, and released inflammatory mediators were detected with a multiparametric immunoassay. RESULTS: The standardized test without barrier indicated both etch-and-rinse adhesives and self-etch as cytotoxic, promoting viabilities under 70% of the control group (p<0.05). The dentin-barrier model identified increased cell viability for self-etch adhesives, with Clearfill SE Bond identified as non-cytotoxic. The immunoassay evidenced high rates of cytokines by cells exposed to the conditioned media of Adper Scotchbond, Optibond S, and Single Bond Universal. CONCLUSIONS: The use of a dentin-barrier in vitro model detected a better biocompatibility for self-etching adhesives and, in the case of Clearfill SE Bond, with a reversion from cytotoxic to biocompatible when compared to the indirect standardized test. CLINICAL SIGNIFICANCE: The use of a dentin-barrier in vitro model was able to detect a better biocompatibility for self-etching adhesives when compared to the indirect standardized test and presents itself as a predictive in vitro method for assessing the cytotoxicity of dental restorative materials that may simulate the clinical condition more accurately.

Cytotoxicity of contemporary resin-based dental materials in contact with dentin.

In this study, the cytotoxicity of different combinations of contemporary resin-based restoratives (adhesives, composites, luting agents) against human keratinocytes (HaCaT) was evaluated under two conditions, whether materials were applied to dentin or not. Adhesives (3-step etch-and-rinse/3ER: OptiBond FL; 2-step self-etch/2SE Clearfil SE Bond; Single Bond Universal/UNI), composites (conventional composite resin/CCR: Filtek Z350XT; flowable/FCR: Filtek Z350XT Flow; self-adhesive composite resin/SACR: Dyad Flow), and luting agents (conventional luting agent/CLA: Variolink-II; self-adhesive luting agent/SLA: RelyXU200) were combined according to their clinical use. Eluates from polymerized specimens applied to dentin were placed in contact with cells grown for 1 and 7 d. The controls were defined by cells without material contact. Cell viability was determined using MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide)] assay. C=C conversion was investigated using Fourier-transform infrared spectroscopy. After 1 d of incubation, when dentin was not present, 2SE yielded the highest cell viability, whereas 3ER, UNI, and SACR showed higher cell viability in the presence of dentin. After 7 d, when dentin was absent, 2SE and CLA achieved significantly higher cell viability. The presence of dentin resulted in a drastically higher cell viability for all materials, except 2SE and CLA. UNI had the lowest C=C conversion. The presence of dentin was a significant factor, which resulted in higher cell viability than what was seen for the material specimens per se. All materials resulted in a lower viability of HaCaT than what was seen under the no-material control conditions, with effects mainly limited to the first 24 h.

Mechanical-physicochemical properties and biocompatibility of catechin-incorporated adhesive resins.

OBJECTIVES: Several anti-proteolytic dentin therapies are being exhaustively studied in an attempt to reduce dentin bond degradation and improve clinical performance and longevity of adhesive restorations. This study assessed the effect of epigallocatechin-3-gallate (EGCG) on long-term bond strength when incorporated into adhesives. MATERIAL AND METHODS: Adhesive systems were formulated with EGCG concentrations of 0 wt%: (no EGCG; control); 0.5 wt% EGCG; 1.0 wt% EGCG, and 1.5 wt% EGCG. Flexural strength (FS), modulus of elasticity (ME), modulus of resilience (MR), compressive strength (CS), degree of conversion (DC), polymerization shrinkage (PS), percentage of water sorption (%WS), percentage of water solubility (%WL) and cytotoxicity properties were tested. Dentin microtensile bond strength (µTBS) was evaluated after 24 h and again after 6 months of water storage. The adhesive interface was analyzed using scanning electron microscopy (SEM). RESULTS: No significant differences were found among the groups in terms of FS, ME, MR, CS and PS. EGCG-doped adhesives increased the DC relative to the control group. EGCG concentrations of 1.0 wt% and 0.5 wt% decreased the WS of adhesives. WL decreased in all cases in which EGCG was added to adhesives, regardless of the concentration. EGCG concentrations of 1.0 wt% and 0.5 wt% reduced cytotoxicity. EGCG concentrations of 1.0 wt% and 0.5 wt% preserved µTBS after 6 months of storage, while 1.5 wt% EGCG significantly decreased µTBS. SEM: the integrity of the hybrid layer was maintained in the 0.5 wt% and 1.0 wt% EGCG groups. CONCLUSION: EGCG concentrations of 1.0 wt% and 0.5 wt% showed better biological and mechanical performance, preserved bond strength and adhesive interface, and reduced cytotoxicity.

Mechanical-physicochemical properties and biocompatibility of catechin-incorporated adhesive resins

Abstract Several anti-proteolytic dentin therapies are being exhaustively studied in an attempt to reduce dentin bond degradation and improve clinical performance and longevity of adhesive restorations. Objectives This study assessed the effect of epigallocatechin-3-gallate (EGCG) on long-term bond strength when incorporated into adhesives. Material and Methods Adhesive systems were formulated with EGCG concentrations of 0 wt%: (no EGCG; control); 0.5 wt% EGCG; 1.0 wt% EGCG, and 1.5 wt% EGCG. Flexural strength (FS), modulus of elasticity (ME), modulus of resilience (MR), compressive strength (CS), degree of conversion (DC), polymerization shrinkage (PS), percentage of water sorption (%WS), percentage of water solubility (%WL) and cytotoxicity properties were tested. Dentin microtensile bond strength (µTBS) was evaluated after 24 h and again after 6 months of water storage. The adhesive interface was analyzed using scanning electron microscopy (SEM). Results No significant differences were found among the groups in terms of FS, ME, MR, CS and PS. EGCG-doped adhesives increased the DC relative to the control group. EGCG concentrations of 1.0 wt% and 0.5 wt% decreased the WS of adhesives. WL decreased in all cases in which EGCG was added to adhesives, regardless of the concentration. EGCG concentrations of 1.0 wt% and 0.5 wt% reduced cytotoxicity. EGCG concentrations of 1.0 wt% and 0.5 wt% preserved µTBS after 6 months of storage, while 1.5 wt% EGCG significantly decreased µTBS. SEM: the integrity of the hybrid layer was maintained in the 0.5 wt% and 1.0 wt% EGCG groups. Conclusion EGCG concentrations of 1.0 wt% and 0.5 wt% showed better biological and mechanical performance, preserved bond strength and adhesive interface, and reduced cytotoxicity.

In vitro dentin barrier cytotoxicity testing of some dental restorative materials.

OBJECTIVES: To investigate the cytotoxicity of four dental restorative materials in three-dimensional (3D) L929 cell cultures using a dentin barrier test. METHODS: The cytotoxicities of light-cured glass ionomer cement (Vitrebond), total-etching adhesive (GLUMA Bond5), and two self-etching adhesives (GLUMA Self Etch and Single Bond Universal) were evaluated. The permeabilities of human dentin disks with thicknesses of 300, 500, and 1000µm were standardized using a hydraulic device. Test materials and controls were applied to the occlusal side of human dentin disks. The 3D-cell scaffolds were placed beneath the dentin disks. After a 24-h contact with the dentin barrier test device, cell viabilities were measured by performing MTT assays. Statistical analysis was performed using the Mann-Whitney U test. RESULTS: The mean (SD) permeabilities of the 300-µm, 500-µm, and 1000-µm dentin disks were 0.626 (0.214), 0.219 (0.0387) and 0.089 (0.028) µlmin-1cm-2cm H2O-1. Vitrebond was severely cytotoxic, reducing the cell viability to 10% (300-µm disk), 17% (500µm), and 18% (1000µm). GLUMA Bond5 reduced the cell viability to 40% (300µm), 83% (500µm), and 86% (1000µm), showing moderate cytotoxicity (300-µm) and non-cytotoxicity (500-µm and 1000-µm). Single Bond Universal and GLUMA Self Etch did not significantly reduce cell viability, regardless of the dentin thicknesses, which characterized them as non-cytotoxic. CONCLUSIONS: Cytotoxicity varied with the materials tested and the thicknesses of the dentin disks. CLINICAL SIGNIFICANCE: The tested cytotoxicity of materials applied on 300-, 500-, and 1000-µm dentin disks indicates that the clinical use of the test materials (excepting self-etching adhesives) in deep cavities poses a potential risk of damage to the pulp tissues to an extent, depending on the thickness of the remaining dentin.

Cytotoxic Effects of One-step Self-etching Dental Adhesives on Human Periodontal Ligament Fibroblasts In Vitro.

PURPOSE: To evaluate the potential cytotoxic effects of four one-step self-etching dental adhesives [Adper Easy One (AEO), iBond (IB), Clearfil S³ Bond (CSB), and G-Bond (GB)] on cultured human periodontal ligament fibroblasts. MATERIALS AND METHODS: Cured adhesives were immersed in complete DMEM or deionized water and maintained at 37°C for 24 h, followed by sterilization. The deionized water-based extract was used for Fourier transform infrared spectroscopy analysis. The DMEM-based extract was diluted into various concentrations for cytotoxicity tests. The viability, integrity, and apoptosis of cultured human periodontal ligament fibroblasts upon treatment with the extracts were determined using the CCK-8 assay, microscopy, and flow cytometry. RESULTS: All of the four adhesives induced cell viability loss, cell morphology alteration, and cell death. GB showed the greatest cytotoxicity by inducing cell apoptosis and necrosis, while IB had the weakest cytotoxic effect on the cultured cells. CONCLUSION: All tested dental adhesives have significant adverse effects on cell viability. Therefore, precautions should be taken to protect the periodontal tissues when dental adhesives are applied in the clinic.

The protective effect of resveratrol against dentin bonding agents-induced cytotoxicity.

This study was designed to evaluate the cytotoxicity of four dentin bonding agents and the effects of an antioxidant addition. Group A: G-aenial Bond, Group B: Optibond All in One, Group C: Gluma Self Etch and Group D: Clearfil S(3) Bond were added to the medium using extract method. The cells were cultured with or without resveratrol (RES) addition. MTT, reactive oxygen species (ROS), DCF, Comet and 8-OHdG measurements were performed. The agents had a dose-dependent (1:1>1:10>1:20) cytotoxic effect. Considering 1:10 concentration; Group D at 1 h (p<0.01) and Group B and D at 24 h had the weakest cytotoxic effect (p<0.05). After RES addition, the highest cell viability was determined in Groups B+RES and D+RES at 1 h and in Groups A+RES and B+RES at 24 h (p<0.01). The dentin bonding agents induced ROS production and DNA damage regarding to their composition. However, RES addition decreased the indicated parameters.

Gene expression analysis of conventional and interactive human gingival cell systems exposed to dental composites.

OBJECTIVES: The aim of this study was the detection of putative gene expression-related effects of dental composites in conventional and interactive gingival cell systems. METHODS: Conventional monoculture (MC) and interactive cell systems (ICS) comprising human gingival fibroblast (HGF) and immortalized human gingival keratinocytes (IHGK) were exposed for 24h and 7 days according to ISO10993-12:2012 manufactured eluates of different composites (Ceram X(®), Filtek™ Supreme XT, Filtek™ Silorane, Fusio™ Liquid Dentin, and Vertise™ Flow). qRT-PCR-based mRNA analysis for biomarkers indicating cell proliferation, differentiation, apoptosis, inflammation, and adhesion was performed. Apoptotic cells were quantified by annexin-V labeling. RESULTS: Due to low RNA amounts, qPCR could not be performed for Vertise™ Flow and Fusio™ Liquid Dentin at day 7. At 24h, flowables yielded increased transcription for biomarkers of inflammation and apoptosis in IHGK, irrespective of the cell system. HGF cultures displayed lower transcription for cell adhesion markers in both cell systems. Filtek™ Supreme XT showed increased differentiation by elevated filaggrin gene expression in both cell systems for IHGK at day 7, while Filtek™ Silorane and Ceram X(®) yielded elevation of inflammation biomarkers in both cell types. Annexin-V labeling revealed high apoptosis rates for both flowables and Filtek™ Supreme XT for IHGK, while low rates were detected for Filtek™ Silorane and Ceram X(®). SIGNIFICANCE: Among the composites evaluated, exposition of IHGK and HGF in conventional and interactive cell systems demonstrated most pronounced gene expression alterations in response to flowables, coinciding with elevated levels of apoptosis.

Effect of dentin bonding agent diffusing through dentin slices on the reactive oxygen species production and apoptosis of pulpal cells.

BACKGROUND/PURPOSE: Dentin bonding agents (DBAs) are cytotoxic to dental pulp cells. This study aimed to evaluate the effects of three DBAs (Optibond Solo Plus, Op; Clearfil SE Bond, SE; and Xeno III, Xe) after diffusion through 0.2-mm or 0.5-mm dentin slices on reactive oxygen species (ROS) production and apoptosis in dental pulp cells. METHODS: The amounts of DBAs diffusing through 0.2-mm or 0.5-mm dentin slices were quantified using a UV-Vis spectrophotometer. The effects of diffused DBAs on ROS production and viability of dental pulp cells were investigated using terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling (TUNEL) assay on Days 1 and 2. Flow cytometric analysis and double staining of treated dental pulp cells with Annexin V-fluorescein isothiocyanate (V-FITC) and propidium iodide (PI) were performed on Day 2. RESULTS: Xe showed greatest diffusion through dentin slices after 8-hour period, followed by SE and Op. Dental pulp cells produced a lesser amount of ROS, when treated with DBAs diffusing through a 0.5-mm dentin slice than through a 0.2-mm dentin slice for the same period of time. A small proportion of cells were TUNEL-positive after treatment with any of the three diffused DBAs. Annexin V-FITC/PI staining identified apoptotic cells; cell survival was higher in those cells treated with DBAs diffusing through a 0.5-mm dentin slice than through a 0.2-mm dentin slice. CONCLUSION: The three DBAs after diffusion through 0.2- or 0.5-mm dentin slice still exhibit cytotoxicity to dental pulp cells. However, the 0.5-mm dentin slice is found to be a better barrier than the 0.2-mm dentin slice to protect dental pulp cells from DBA-induced cytotoxicity.

Cytotoxicity of universal, self-etching and etch-and-rinse adhesive systems according to the polymerization time.

This in vitro study evaluated in fibroblast cultures the direct cytotoxicity of universal, self-etching and etch-and-rinse adhesive systems according to the polymerization time. Paper discs were impregnated with adhesives and light-cured (10, 20 or 40 s). The discs were then immersed in culture medium to obtain the eluates for the experimental groups (A1-Single Bond 2; A2-Scotchbond Multi-purpose; A3-Clearfil SE Bond; A4 Scotchbond Universal). As a negative control, paper discs were immersed in culture medium only. After 24 h or 7 days, the eluate obtained was applied on fibroblast culture. Cell viability, cell morphology, membrane damage and the presence of residual monomers were evaluated by MTT assay, SEM, flow cytometry and high-performance liquid chromatography (HPLC), respectively. Data were analyzed by Kruskal-Wallis and Mann-Whitney tests (=0.05). All adhesive systems significantly reduced 33-51% cell metabolism when compared to the negative control, regardless of polymerization time, storage period and adhesive system. Moreover, the adhesives caused intense morphological alterations and cell membrane damage. Toxicity was directly related to the presence of residual monomers in the eluates. Residual monomers and additional components are capable of reducing mitochondrial activity, causing morphological alterations and disruption of the cell membrane in fibroblasts, regardless of the polymerization time. This study highlights that despite the more complex composition of the universal adhesive system, its biological response was not more toxic when compared with other systems, even when the shortest polymerization time was tested in cell culture.

Cytotoxicity of Universal, Self-Etching and Etch-and-Rinse Adhesive Systems According to the Polymerization Time

This in vitro study evaluated in fibroblast cultures the direct cytotoxicity of universal, self-etching and etch-and-rinse adhesive systems according to the polymerization time. Paper discs were impregnated with adhesives and light-cured (10, 20 or 40 s). The discs were then immersed in culture medium to obtain the eluates for the experimental groups (A1-Single Bond 2; A2-Scotchbond Multi-purpose; A3-Clearfil SE Bond; A4 Scotchbond Universal). As a negative control, paper discs were immersed in culture medium only. After 24 h or 7 days, the eluate obtained was applied on fibroblast culture. Cell viability, cell morphology, membrane damage and the presence of residual monomers were evaluated by MTT assay, SEM, flow cytometry and high-performance liquid chromatography (HPLC), respectively. Data were analyzed by Kruskal-Wallis and Mann-Whitney tests (=0.05). All adhesive systems significantly reduced 33-51% cell metabolism when compared to the negative control, regardless of polymerization time, storage period and adhesive system. Moreover, the adhesives caused intense morphological alterations and cell membrane damage. Toxicity was directly related to the presence of residual monomers in the eluates. Residual monomers and additional components are capable of reducing mitochondrial activity, causing morphological alterations and disruption of the cell membrane in fibroblasts, regardless of the polymerization time. This study highlights that despite the more complex composition of the universal adhesive system, its biological response was not more toxic when compared with other systems, even when the shortest polymerization time was tested in cell culture.

O presente estudo in vitro avaliou a citotoxicidade direta dos sistemas adesivos convencionais, autocondicionantes e universais de acordo com o tempo de polimerização em cultura de fibroblastos. Discos de papel foram impregnados com adesivos e fotoativados (10, 20 e 40 s). Os discos foram posteriormente imersos em meio de cultura para obtenção dos eluatos dos grupos experimentais (A1-Single Bond 2; A2-Scotchbond Multi-purpose; A3-Clearfil SE Bond; A4 Scotchbond Universal). Para o controle negativo, os discos de papel foram imersos somente em meio de cultura. Após 24 h ou 7 dias, o eluato obtido foi aplicado na cultura de fibroblastos. O metabolismo celular, morfologia, dano de membrana e presença de monômeros residuais foram avaliados por teste de MTT, MEV, citometria de fluxo e HPLC, respectivamente. Os dados foram analisados estatisticamente por Kruskal-Wallis e Mann-Whitney. Todos os sistemas adesivos reduziram significativamente o metabolismo celular em 33 a 51% quando comparados ao grupo controle, independente do tempo de polimerização, período de armazenamento e tipo de sistema adesivo. O eluato do adesivos causou ainda intensas alterações morfológicas e danos à membrana celular. A toxicidade foi diretamente relacionada à presença de monômeros residuais nos eluatos experimentais. Monômeros residuais e componentes adicionais dos sistemas adesivos foram capazes de reduzir a atividade mitocondrial, causar alterações morfológicas e danos à membrana citoplasmática de fibroblastos, independente do tempo de polimerização. Esse estudo evidencia que apesar de uma composição mais complexa do sistema adesivo universal, sua resposta biológica não apresentou maior toxicidade quando comparado aos demais sistemas, mesmo no menor tempo de polimerização quando testados em cultura celular.

Cytotoxicity of dentin bonding agents.

This study sought to evaluate the cytotoxicity of 5 dentin bonding agents (Admira Bond, Adper Single Bond Plus, Clearfil SE Bond, Clearfil S3 Bond, and Heliobond) by XTT assay using human gingival fibroblast cells. Samples of dentin bonding agents were prepared on a black 96-well microplate, and the cytotoxicity of each bonding material was measured every 24 hours for 7 days, then on Days 14, 21, and 28. One-way ANOVA and Bonferroni post hoc tests were used for statistical analyses. All 5 materials were evaluated as severely cytotoxic (P < 0.001) on the first day, with cell viabilities ranging from 6% to 24%. All the bonding agents showed severe cytotoxicity with viability results <10%. With the exception of Adper Single Bond Plus, toxicity continued to Day 28 for all compounds. The utmost care must be considered during the clinical utilization of dentin bonding agents to keep them within the area of restoration and prevent their contact with adjacent tissues.

Doxycycline-encapsulated nanotube-modified dentin adhesives.

This article presents details of fabrication, biological activity (i.e., anti-matrix metalloproteinase [anti-MMP] inhibition), cytocompatibility, and bonding characteristics to dentin of a unique doxycycline (DOX)-encapsulated halloysite nanotube (HNT)-modified adhesive. We tested the hypothesis that the release of DOX from the DOX-encapsulated nanotube-modified adhesive can effectively inhibit MMP activity. We incorporated nanotubes, encapsulated or not with DOX, into the adhesive resin of a commercially available bonding system (Scotchbond Multi-Purpose [SBMP]). The following groups were tested: unmodified SBMP (control), SBMP with nanotubes (HNT), and DOX-encapsulated nanotube-modified adhesive (HNT+DOX). Changes in degree of conversion (DC) and microtensile bond strength were evaluated. Cytotoxicity was examined on human dental pulp stem cells (hDPSCs). To prove the successful encapsulation of DOX within the adhesives-but, more important, to support the hypothesis that the HNT+DOX adhesive would release DOX at subantimicrobial levels-we tested the antimicrobial activity of synthesized adhesives and the DOX-containing eluates against Streptococcus mutans through agar diffusion assays. Anti-MMP properties were assessed via ß-casein cleavage assays. Increasing curing times (10, 20, 40 sec) led to increased DC values. There were no statistically significant differences (p > .05) in DC within each increasing curing time between the modified adhesives compared to SBMP. No statistically significant differences in microtensile bond strength were noted. None of the adhesives eluates were cytotoxic to the human dental pulp stem cells. A significant growth inhibition of S. mutans by direct contact illustrates successful encapsulation of DOX into the experimental adhesive. More important, DOX-containing eluates promoted inhibition of MMP-1 activity when compared to the control. Collectively, our findings provide a solid background for further testing of encapsulated MMP inhibitors into the synthesis of therapeutic adhesives that may enhance the longevity of hybrid layers and the overall clinical performance of adhesively bonded resin composite restorations.

In vitro detection of DNA damage in human leukocytes induced by combined effect of resin composites and adhesive systems.

PURPOSE: To simultaneously evaluate the genotoxicity of dental composites and adhesive systems in vitro using a cytogenetic assay, with respect to the influence of composite shade. METHODS: Genotoxicity assessment was carried out in human peripheral blood leukocytes using the comet assay. Three resin composite materials, two microhybrids and one nano-hybrid, in shade A1 and A3.5 were used with manufacturer-recommended four adhesive systems. Cultures were treated for 48 hours with samples after elusion for 1 hour, 1 day, 7 days or 30 days, in two different concentrations (4.16 mg/mL, 8.33 mg/mL). Kruskall-Wallis test was used for the statistical analysis (alpha = 0.05). RESULTS: For combinations of micro-hybrid composite (A3.5) with two self-etch adhesives (16.1 +/- 5.50 and 16.2 +/- 9.52) after exposure to samples eluted for 1 day, the incidence of primary DNA damage was significantly higher than for the corresponding negative control (14.7 +/- 2.85). Genotoxicity was also higher after treatment with samples eluted for 1 hour (15.3 +/- 4.70) and 1 day (15.3 +/- 9.10), comprised of nano-hybrid composite (A1) with self-etch adhesive in relation to the control (13.1 +/- 1.70). There was no clear trend of increased DNA damage in material combinations with darker shades of composites. Material composition and higher material concentrations showed greater influence on the genotoxicity.

Effects of plasma-emulating light-emitting diode (LED) versus conventional LED on cytotoxic effects and polymerization capacity of orthodontic composites.

OBJECTIVES: The aim of this study was to evaluate, the cytotoxicity of orthodontic composites in vitro as a function of degree of conversion (DC) and the light curing units (LCU) employed on mouse fibroblast (L929). MATERIALS AND METHODS: Cured samples of the composites Light bond (Reliance Orthodontic Products, Itasca, Illinois, USA), Ortho bracket paste (Bisco, Schaumburg, Illinois, USA), Opal bond MV (OPAL, South Jordan, Utah, USA), and Transbond XT (3M, Monrovia, California, USA) were prepared. Polymerization was performed with two LCUs: VALO Ortho (Ultradent, South Jordan, Utah, USA) is a third-generation LCU and Elipar S10 (3M, USA) is a second-generation LCU. Four samples were immersed in cell culture medium to obtain composite extracts. After incubation of L929 cell cultures with the extracts obtained, cytotoxicity was determined using the methyl tetrazolium test. Fourier transform infrared spectroscopy (FTIR) was used to evaluate DC for five samples. A multivariate analysis of variance (ANOVA), two-way ANOVA, and Tukey's honestly significant difference test were utilized for statistical analyses. RESULTS: Cytotoxicity and DC of all tested composites (p < 0.001) and the interaction between composites and LCUs (p < 0.01) were significantly different. LCUs had no significant influence on the cytotoxicity and DC of composite materials (p > 0.05). The correlations between cell viability and DC were positive for three composites but statistically insignificant. CONCLUSION: Composites and LCUs must be matched with one another to result in satisfactory maximal biocompatibility and DC. Opal Bond plasma light-emitting diode combination was a better choice for cell viability. Three composites showed a positive correlation between cytotoxicity and DC. Therefore high-intensity LCUs can be said to efficiently affect polymerization, and so, higher DC rates may achieve higher cell viability rates.

The effects of restorative composite resins on the cytotoxicity of dentine bonding agents.

During restoration of damaged teeth in dental clinics, dentin bonding agents are usually overlaid with restorative resin composites. The purpose of this study was to investigate the effects of restorative resin composites on cytotoxicity of dentin bonding agents. Dentin bonding agents were placed on glass discs, pre-cured and uncured resin composite discs. Bonding agents on the glass discs and composite resins discs were light cured and used for agar overlay cytotoxicity testing. Dentin bonding agents on composite resin discs exhibited far less cytotoxicity than that on glass discs. The polymerization of resin composite increased the surface hardness and decreased the cytotoxicity of bonding agents. In conclusion, composite resins in dental restorations are expected to enhance the polymerization of dentin bonding agents and reduce the elution of resin monomers, resulting in the decrease of cytotoxicity.

Transdentinal cytotoxicity of experimental adhesive systems of different hydrophilicity applied to ethanol-saturated dentin.

The aim of this study was to evaluate the transdentinal cytotoxicity of experimental adhesive systems (EASs) with different hydrophilicity and dentin saturation solutions on odontoblast-like cells. One hundred 0.4-mm-thick dentin discs were mounted in in vitro pulp chambers and assigned to 10 groups. MDPC-23 cells were seeded onto the pulpal side of the discs, incubated for 48h. The EASs with increasing hydrophilicity (R1, R2, R3 and R4) were applied to the occlusal side after etching and saturation of etched dentin with water or ethanol. R0 (no adhesive) served as controls. R1 is a non-solvated hydrophobic blend, R2 is similar to a simplified etch-and-rinse adhesive system and R3 and R4 are similar to self-etching adhesives. After 24h, cell metabolism was evaluated by MTT assay (n=8 discs) and cell morphology was examined by SEM (n=2 discs). Type of cell death was identified by flow cytometry and the degree of monomer conversion (%DC) was determined by infrared spectroscopy (FTIR) after 10s or 20s of photoactivation. Data were analyzed by the Kruskal-Wallis and Mann-Whitney tests (α=0.05). Dentin saturation with ethanol resulted in higher necrotic cell death ratios for R2, R3 and R4 compared with water saturation, although R2 and R3 induced higher SDH production. Photoactivation for 20s significantly improved the %DC of all EASs compared with 10s. A significant positive correlation was observed between the degree of hydrophilicity and %DC. In conclusion, except for R1, dentin saturation with ethanol increased the cytotoxicity of EASs, as expressed by the induction of necrotic cell death.

The addition of nanostructured hydroxyapatite to an experimental adhesive resin.

OBJECTIVES: Was produced nanostructured hydroxyapatite (HAnano) and evaluated the influence of its incorporation in an adhesive resin. METHODS: HAnano was produced by a flame-based process and was characterized by scanning electron microscopy. The surface area, particle size, micro-Raman and cytotoxicity were evaluated. The organic phase was formulated by mixing 50 wt.% Bis-GMA, 25 wt.% TEGDMA, and 25 wt.% HEMA. HAnano was added at seven different concentrations: 0; 0.5; 1; 2; 5; 10 and 20 wt.%. Adhesive resins with hydroxyapatite incorporation were evaluated for their radiopacity, degree of conversion, flexural strength, softening in solvent and microshear bond strength. The data were analyzed by one-way ANOVA and Tukey's post hoc test (α=0.05), except for softening in solvent (paired t-test) and cytotoxicity (two-way ANOVA and Bonferroni). RESULTS: HAnano presented 15.096 m(2)/g of specific surface area and a mean size of 26.7 nm. The radiopacity values were not different from those of 1-mm aluminium. The degree of conversion ranged from 52.2 to 63.8%. The incorporation of HAnano did not influence the flexural strength, which ranged from 123.3 to 143.4MPa. The percentage of reduction of the microhardness after immersion in the solvent became lower as the HAnano concentration increased. The addition of 2% nanostructured hydroxyapatite resulted in a higher value of microshear bond strength than the control group (p<0.05). CONCLUSIONS: The incorporation of 2% of nanostructured hydroxyapatite into an adhesive resin presented the best results. CLINICAL SIGNIFICANCE: The incorporation of nanostructured hydroxyapatite increases the adhesive properties and may be a promising filler for adhesive resin.

Tetrahydrofuran as solvent in dental adhesives: cytotoxicity and dentin bond stability.

OBJECTIVES: The aim of this study was to investigate the cytotoxicity and 1-year dentin bond stability of solvated etch-and-rinse dental adhesives based on tetrahydrofuran (THF), acetone, or ethanol, containing water or not. MATERIALS AND METHODS: Seven primers were prepared using the following solvents: THF, acetone, ethanol, water, THF/water, acetone/water, and ethanol/water. Bovine dentin was used, and specimens for microtensile bond strength (µTBS) test were prepared. Specimens were tested after storage in distilled water for 24 h or 1 year. Cytotoxicity of the solvents was evaluated in 3T3/NIH mouse fibroblasts using a colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay after exposure for 24 h. RESULTS: No significant differences were detected among solvents after storage for 24 h, except for the water-based group, which showed the lowest µTBS values. After storage for 1 year, the THF-based adhesive system resulted in more stable bonds. Yet, THF showed an intermediate cytotoxicity when compared with the other solvents, being less toxic than phosphate monomer and similar to 2-hydroxyethyl methacrylate. CONCLUSION: THF seems to be a suitable solvent for adhesive systems. CLINICAL RELEVANCE: THF is a promising solvent that can be used to improve dentin bond stability.

Cytotoxicity test of dentin bonding agents using millipore filters as dentin substitutes in a dentin barrier test.

OBJECTIVES: The purpose of this study was to find proper dentin substitute for standardized dentin barrier test and perform the cytotoxicity test of commercial bonding agents with the proper substitute. MATERIALS AND METHODS: The three-dimensional cells attached to dentin disc or millipore filters as the dentin substitute were tested in a dentin barrier test by perfusion. MTT assay was performed as an evaluation method for the cell survival rate. The cytotoxicity test of serial phenol dilution by bovine dentin disc was done to determine a standard toxic material, and the test of this proper phenol by using various millipore combinations was performed to find the suitable dentin substitute. Also, the cytotoxicity test of bonding agents was performed by this standardized substitute. The cell viability was expressed as percentages of untreated group. RESULTS: Phenol concentration of 0.05 % was selected as the standard toxic material. The different combinations of millipore filters--two sheets of 0.45 µm, two sheets of 0.22 µm, and the combination of 0.65, 0.45, and 0.22 µm--showed similar cytotoxicity to natural dentin discs by 0.05 % phenol (p > 0.05). The millipore combination of 0.65, 0.45, and 0.22 µm that had structural similarity to natural dentin discs was used as the substitute for cytotoxicity test of bonding agents. The toxic level of Adper Prompt L-Pop using the selected substitute was significantly the highest among four kinds of dentin bonding agents (p < 0.05). Also, the dentin barrier test by the substitute showed constant results compared with the one by the natural dentin disc. CONCLUSIONS: The millipore filter combination of 0.65, 0.45, and 0.22 µm could be used as the substitute for the cytotoxicity test of materials applied to dentin. CLINICAL RELEVANCE: Dentin barrier test by standardized substitutes would be helpful for considering the potential toxicity of dentin bonding agents prior to clinical adaptations and reducing the variations of natural bovine dentin that has individually different characteristics.